|
STAKI is a top quality European manufactured floor. The brand enjoys a first class reputation worldwide. The standard engineered range is available in 2 sizes - 20mm x 220mm and 15mm x 180mm. Boards are 2.4m long and constructed using top quality Birch Ply. Finishes are hardwax oil and lacquer. If you would like to learn more about the STAKI brand, please follow this link to their website - www.staki.li/en/ - We can obtain any STAKI products which are featured. |
Our STAKI TOP-LAG Flooring has been cleverly manufactured to give the stability of an engineered board but is made up of 100% solid oak which keeps the wood expansion to a minimum. This unique design means that this solid oak floor is perfectly suitable for underfloor heating. Must be installed stuck down.

The two oak layers are glued in the cold way using EPI glue, which meets resistance class D4 according to EN204. The top layer of TOP-LAG wooden flooring is 6 mm oak, for this reason the operational period is much longer than many others parquet with the same thickness. The bottom layer oak has a finger jointed construction to allow heat to easily pass through the floor. TOP-LAG is a tongue and groove board, dimensions are 14 x 180 x 500-2450mm. It is 2 bevelled along the sides and is rustic grade.
TOP-LAG is available in 11 colours, see products which vary in contrast to suit your customer’s needs. Please allow a 6 weeks lead time for TOP-LAG colours. Some of our products are smoked which can cause colour variation between the boards. We recommend sticking this product down to the subfloor using Wakol MS230 adhesive which is a flexible silane adhesive used to stick down engineered and solid wood flooring and is also suitable for underfloor heating (up to 27 degrees).
TOP-LAG wooden flooring thermal conductivity coefficient λ = 0,15 W/m2K. Therefore, we recommend these flooring installed on the heated base. However, the heated floor surface temperature can not exceed 30 ° C.
